Ignition

TESTING STARTER of STARTER/GENERATOR
1) Remove all wires from starter/generator.
2) Connect 12 volt positive cable to A-1 terminal.
3) Connect 12 volt negative supply to F-1 terminal.
4) Use a jumper wire to connect A-2 and F-2 terminals.

TESTING GENERATOR of STARTER/GENERATOR
1) Disconnect GREEN wire (DF) from starter/generator.
2) Using a jumper, connect the DF terminal to A1 terminal.
3) Place volt meter on battery.
4) Operate engine and note battery reading.
5) Reading should indicate a rising voltage.
6) If voltage rises, check the voltage regulator for proper operation.

No items found

Would you like to continue shopping or view our site map?